Pool Panels

Pool Fence Panels — Buying Guide

Pool safety fencing is a legal requirement for all residential swimming pools and spas in Queensland, and across Australia. The right pool fence panels must meet specific safety standards while complementing the design of your home and outdoor entertaining area. Our pool fence panel range combines compliance, durability, and aesthetics for a result you’ll be proud of.

Queensland Pool Fencing Requirements

In Queensland, all swimming pools and spas capable of holding more than 300mm of water must be surrounded by a compliant safety barrier under the Queensland Building and Construction Commission (QBCC) regulations and the Building Code of Australia. Key requirements include a minimum fence height of 1200mm, non-climbable zones (NCZ) on both sides of the fence, self-closing and self-latching gates, and no gaps exceeding 100mm at the base of the fence. Always verify your installation meets current local council and state requirements before purchasing or installing pool fencing.

Types of Pool Fence Panels

• Glass pool fencing panels: Frameless or semi-frameless tempered glass panels — the premium choice for a contemporary, unobstructed view of the pool area. Very popular on Sunshine Coast and Brisbane properties where the pool is a visual centrepiece
• Aluminium pool fence panels: Powder-coated aluminium picket or flat bar panels — strong, lightweight, and corrosion-resistant. Available in a wide range of colours and profiles to match any home
• PVC pool fence panels: Low-maintenance white PVC panels suited to properties where the Hamptons or coastal aesthetic is preferred

Key Compliance Considerations

• Minimum height of 1200mm (from finished ground level to the top of the fence)
• No gaps greater than 100mm at the base, between pickets, or at any climbable point
• Non-climbable zones (NCZ) must be maintained on both sides — no furniture, plants, or structures within the NCZ
• Gates must be self-closing and self-latching, with the latch on the inside of the pool enclosure at a minimum height of 1500mm from the ground, or with the latch shielded
• All pool fencing in Queensland must be inspected and approved by a licensed building certifier or pool safety inspector

Installation Tips

Pool fencing should be installed by a qualified fencing contractor or experienced DIYer with a thorough understanding of the applicable standards. Posts must be correctly set in concrete at the appropriate spacing for your panel width. All gate hardware must be pool-safe grade — self-closing hinges, self-latching locks, and no ligature points. After installation, have your fence certified by a registered pool safety inspector before putting the pool into use.

Frequently Asked Questions

Do I need a council approval to install a pool fence in Queensland?
Pool fence installation is subject to Queensland building regulations. A Form 16 (Safety Inspection Certificate) from a licensed pool safety inspector is required. Check with your local council for specific approval requirements in your area.

What is the minimum height for a pool fence in Queensland?
The minimum height for a pool safety fence in Queensland is 1200mm, measured from the finished ground level on the outside of the fence to the top of the fence barrier.

Do you deliver pool fence panels to Brisbane and the Sunshine Coast?
Yes — we offer Australia-wide delivery including to Brisbane, the Sunshine Coast, and all of South East Queensland. Contact us for a freight quote on panel orders.

Order Pool Fence Panels Online — Sunshine Coast, Brisbane & Australia-Wide

Discount Landscape Supplies stocks pool fence panels to suit a range of residential styles and compliance requirements. Browse our range online or contact our team for expert advice on pool fencing compliance, product selection, and installation guidance.